Cisco Access Point Software Uncontrolled Resource Consumption Vulnerability – Source:sec.cloudapps.cisco.com

Medium

Summary

• A vulnerability in the packet processing functionality of Cisco access point (AP) software could allow an unauthenticated, adjacent attacker to exhaust resources on an affected device.

  This vulnerability is due to insufficient management of resources when handling certain types of traffic. An attacker could exploit this vulnerability by sending a series of specific wireless packets to an affected device. A successful exploit could allow the attacker to consume resources on an affected device. A sustained attack could lead to the disruption of the Control and Provisioning of Wireless Access Points (CAPWAP) tunnel and intermittent loss of wireless client traffic.

  Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

  This advisory is available at the following link:
  https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ap-dos-capwap-DDMCZS4m

Affected Products

• At the time of publication, this vulnerability affected the following Cisco products if they were running a vulnerable software release:

  • 6300 Series Embedded Services APs
  • Aironet 1540 Series APs
  • Aironet 1560 Series APs
  • Aironet 1800 Series APs
  • Aironet 2800 Series APs
  • Aironet 3800 Series APs
  • Aironet 4800 APs
  • Business 100 Series APs and Mesh Extenders
  • Business 200 Series APs
  • Catalyst 9100 APs
  • Catalyst IW6300 Heavy Duty Series APs
  • Integrated APs on 1100 Integrated Services Routers (ISRs)

  For information about which Cisco software releases were vulnerable at the time of publication, see the Fixed Software section of this advisory. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.

  Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.

  Cisco has confirmed that this vulnerability does not affect any Cisco AP series that is not listed in the Vulnerable Products section of this advisory.

Workarounds

• There are no workarounds that address this vulnerability.

Fixed Software

• When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page, to determine exposure and a complete upgrade solution.

  In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.

  Fixed Releases

  At the time of publication, the release information in the following tables was accurate. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.

  The left column lists Cisco software releases, and the right column indicates whether a release was affected by the vulnerability described in this advisory and which release included the fix for this vulnerability.

  The process to upgrade an AP requires administrators to upgrade the wireless controller to which the AP is registered. Customers are advised to upgrade to an appropriate fixed software release as indicated in the following tables.

  APs Managed by Wireless LAN Controller or Mobility Express

  Cisco Wireless LAN Controller Software Release	First Fixed Release
  8.9 and earlier	Migrate to a fixed release.
  8.10	8.10.190.0

  APs Managed by Catalyst 9800 Wireless Controller or Embedded Wireless Controller

  Cisco Catalyst 9800 Wireless Controller Software Release	First Fixed Release
  17.2 and earlier	Migrate to a fixed release.
  17.3	17.3.8
  17.4	Migrate to a fixed release.
  17.5	Migrate to a fixed release.
  17.6	17.6.6
  17.8	Migrate to a fixed release.
  17.9	17.9.4
  17.10	Migrate to a fixed release.
  17.11	Migrate to a fixed release.
  17.12	Not vulnerable.

  Business Wireless AP Software

  Cisco Business 100 and 200 Series AP Software Release	First Fixed Release
  10.9.1 and earlier	Migrate to a fixed release.
  10.10.1	10.10.1.0

  Cisco Business 150 Series AP Software Release	First Fixed Release
  10.5.2 and earlier	Migrate to a fixed release.
  10.6.2	10.6.2.0

  The Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.

Exploitation and Public Announcements

• The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.

Source

• This vulnerability was found during internal security testing.

Cisco Security Vulnerability Policy

• To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.

• Subscribe

Related to This Advisory

URL

• https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ap-dos-capwap-DDMCZS4m

Revision History

• Version	Description	Section	Status	Date
  2.0	Added Business AP 100 and 200 Series as vulnerable products with fixed releases.	Vulnerable Products and Fixed Software	Final	2024-DEC-12
  1.0	Initial public release.	–	Final	2023-SEP-27

  Show Less

Feedback

• Leave additional feedback